Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
- 2. The engine
   2.1. Removal of the top casing of the engine
   + 2.2. Installation of the piston of the first cylinder in position ВМТ of a step of compression
   2.3. Replacement of a belt of a drive of the generator
   + 2.4. Replacement and adjustment of a tension of a belt of a drive of a camshaft
   2.5. Replacement of a chain of a drive of a camshaft
   2.6. Selection of a distributive gear wheel of a cranked shaft
   2.7. Replacement of a lining of a head of the block of cylinders
   2.8. Replacement of an epiploon of a camshaft
   2.9. Replacement маслосъемных caps
   2.10. Replacement of a forward epiploon of a cranked shaft
   2.11. A back epiploon of a cranked shaft
   + 2.12. Repair of a head of the block of cylinders
   + 2.13. Engine repair
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes


75d7f213

2.11. A back epiploon of a cranked shaft
THE GENERAL DATA

THE DIESEL ENGINE

The prevention

Back epiploon replace only in gathering with the holder.

The epiploon should be made of material ПТФЭ, a distinctive sign of such epiploon is the versatile working edge (fig. the Epiploon of a cranked shaft see) and absence of a spring. Before installation do not grease a working edge of an epiploon and a shaft, they should be dry and pure.


PERFORMANCE ORDER
1. Remove a transmission.
2. Remove coupling.
3. Turn away bolts 5 (fig. Installation of epiploons of a cranked shaft see) and remove a flywheel 4.
4. Remove a guard 6 картера couplings.
5. Remove oil картер the engine (subsection 3.1 see).
6. Turn away bolts of 7 fastenings and remove the holder 8 with an epiploon.
7. Establish the new holder with an epiploon. Thus do not take out from an epiploon directing plug, on this plug move the holder with an epiploon on a cranked shaft. Screw bolts 7, then remove from a cranked shaft directing plug.
8. Establish all removed details upside-down.

PETROL ENGINES of 1,0 l, 37 kw And 1,4 l, 50 kw

PERFORMANCE ORDER
1. Remove a transmission.
2. Remove coupling.
3. Keeping a cranked shaft from проворачивания, turn away bolts 6 (fig. the Block of cylinders of engines of 1,0 l, 37 kw and 1,4 l, 50 kw) fastenings see and remove a flywheel 5.
4. Take out an old epiploon 7 by means of a stripper of sealing rings or having picked up a screw-driver. Wipe a pure rag seats under an epiploon on cranked to a shaft and in the holder 8. If it is not possible to take out an old epiploon, it is possible to remove the holder 8.
5. Grease a working edge and an external surface of a new epiploon with engine oil.
6. Запрессуйте a new epiploon in the holder 8 against the stop, a working edge inside.
7. Establish all details upside-down.