Skoda Fabia

Since 2000 of release

Repair and car operation


Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
- 11. A body
   11.1. Removal and installation of a skeleton of a motor compartment
   + 11.2. A forward door
   + 11.3. A back door
   + 11.4. Seats
   + 11.5. Seat belts
   11.6. Removal and installation of the panel of devices
   11.7. Removal and tjagovo-drawbar installation
   + 11.8. A heater
+ 12. Electroschemes


75d7f213

11.7. Removal and tjagovo-drawbar installation
THE GENERAL DATA

Tjagovo-drawbar details
1 – the tjagovo-drawbar;
2 – bolts;
3 – a protective cap;
4 – a hook with a spherical head;
5 – заглушка;
 6 – the screw;
7 – washers;
8 – the socket;
9 – a sealant;
10 – a socket arm

PERFORMANCE ORDER
1. Remove a hook 4 (fig. of the Detail of the tjagovo-drawbar) the tjagovo-drawbar according to the instruction applied on it see and establish instead of it заглушку 5.
2. Remove the back buffer.
3. Turn away three screws of 6 fastenings and remove the socket 8, having disconnected from it wires.
4. Take out a plait of wires from an arm 10 on the tjagovo-drawbar.
5. Turn away four bolts 2 and remove the tjagovo-drawbar 1 from the car.
6. Establish the tjagovo-drawbar upside-down.

The inhaling moments, Нм

Bolt of fastening of the tjagovo-drawbar
70
The screw of fastening of the socket
2,5