Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
- 3. Greasing system
   3.1. Removal and installation oil картера the engine
   3.2. Repair of the oil pump on engines of 1,0 l, 37 kw and 1,4 l, 50 kw
   3.3. Replacement of the oil pump
   3.4. The oil filter of the diesel engine
   3.5. Check of level of oil in картере the engine
   3.6. Replacement of oil and the oil filter
+ 4. The power supply system
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes



3.4. The oil filter of the diesel engine
THE GENERAL DATA

Details of the oil filter of the diesel engine

1 – the bottom cover;
2 – a sealing ring of a cover;
3 – the heat exchanger;
4 – a heat exchanger lining;
5 – a carving stopper;
6 – the gauge of insufficient pressure of oil;
7 – the filter case;
8 – a bolt of fastening of the filter;
9 – a filter lining;
10 – an union lining;
11 – the union;
12 – a tube of giving of oil in турбокомпрессор;
13 – the top cover of the filter;
14 – a sealing ring of the top cover;
15 – a filtering element;
16 – the bottom sealing ring

Replacement of the oil heat exchanger

PERFORMANCE ORDER
1. Merge oil from картера the engine.
2. Merge a liquid from system of cooling of the engine.
3. Disconnect from unions of the heat exchanger hoses of system of cooling. Mark hoses not to mix them at connection.
4. Turn away the bottom cover 1 (fig. of the Detail of the oil filter of the diesel engine see) and remove the heat exchanger 3.
5. Densely establish a new lining 4 on the heat exchanger.
6. Replace a sealing ring 2.
7. Establish the heat exchanger on the filter and screw the bottom cover manually. Then turn the heat exchanger against the stop towards an inhaling of a cover and definitively tighten a cover. The moment of an inhaling of the bottom cover of the oil filter – 25 Нм.
8. Connect to the heat exchanger hoses, fill in a liquid in system of cooling and oil in картер the engine.

Removal and installation of the oil filter

PERFORMANCE ORDER
1. Disconnect a wire from the plug - the storage battery.
2. Merge oil from картера the engine.
3. Merge a liquid from system of cooling of the engine.
4. Disconnect колодку with wires from the gauge 6 insufficient pressure of oil.
5. Disconnect from unions of the heat exchanger hoses of system of cooling. Mark hoses not to mix them at connection.
6. On the engine of 1,9 l, 74 kw turn on накидную a nut and disconnect a tube of 12 givings of oil in турбокомпрессор.
7. Turn away bolts of 8 fastenings of the oil filter to the block of cylinders.
8. Remove the oil filter in gathering.
9. Replace a lining 9 filters with the new.
10. Establish the filter upside-down.

The prevention

Do not turn on a stopper 5, differently it is necessary to replace it.