Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
- 5. Cooling system
   5.1. Check of tightness of system of cooling
   5.2. Check of a stopper of a broad tank
   5.3. Removal and radiator installation on models without the conditioner
   5.4. Removal and radiator installation on models with the conditioner
   5.5. Removal and installation of the water pump on models with petrol engines
   5.6. Removal and installation of the water pump on models with diesel engines
   5.7. Removal and installation of the fan of a radiator
   5.8. Replacement of the gauge of inclusion of the fan
   5.9. Removal and thermostat installation
   5.10. Thermostat check
   5.11. Replacement of hoses of system of cooling of the engine
   5.12. Check of level of a cooling liquid
   5.13. Replacement of a cooling liquid
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes



5.13. Replacement of a cooling liquid
THE GENERAL DATA

Stopper of a drain aperture of a radiator

1 – a branch pipe of a drain aperture;

2 – a stopper

Fill in the cooling liquid corresponding to norms TL VW 774 D (the tab. Recommended cooling liquids see).

Depending on an ambient temperature it is necessary to dissolve a concentrate of a cooling liquid with the distilled water according to tab. of Norm of cultivation of a concentrate of a cooling liquid.


The prevention

Replace cooling liquid on the cold engine.


It is strictly forbidden to pour out cooling liquid on the earth or in water drain system as containing in it этиленгликоль is highly toxic poison. Its hit in ground waters will lead to adverse ecological consequences for environment.
PERFORMANCE ORDER
1. Uncover a broad tank.
2. Remove грязезащитный an engine guard.
3. Substitute under a branch pipe of 1 drain aperture capacity for gathering of the fulfilled liquid (fig. the Stopper of a drain aperture of a radiator see). For convenience of work put on a branch pipe a hose.
4. Turn away a stopper 2 drain apertures.
5. On models with diesel engines ослабьте an inhaling of a collar also disconnect a hose 1 from the forward union of the heat exchanger 2. Wait, when all liquid will merge, and connect a hose 1 to the forward union of the heat exchanger (3 – the oil filter).
6. Wrap a stopper 2 (fig. the Stopper of a drain aperture of a radiator see) drain aperture.
7. Fill in a new cooling liquid in a broad tank to a label «max».
8. Establish a cover on a broad tank.
9. Start up the engine and allow to it to work, the radiator fan will not join yet.
10. Check up level of a cooling liquid in a broad tank and if necessary add a liquid.
11. On the heated-up engine level of a cooling liquid should be in a broad tank on a label «max» or hardly above. On the cold engine liquid level should not fall below a label «min».

The prevention

On the heated-up engine the cooling system is under pressure. Therefore remove a stopper of a broad tank on the cold engine; if it is necessary to open a tank on the hot engine, cover a stopper with a rag and remove its outstretched arm.


Recommended cooling liquids

The name of a cooling liquid
The manufacturer
Glysantin G 30-72
BASF AG
XT 4030
ELF OIL AG
Coolant ETX 6280
TEXACO
FROSTOX SF-D 12
HENKEL HAERTOL GmbH

Norms of cultivation концинтрата a cooling liquid

Freezing temperature, ° With
Share of a concentrate, %
Share of the distilled water, %
- 25
40
60
- 35
50
50