Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
- 5. Cooling system
   5.1. Check of tightness of system of cooling
   5.2. Check of a stopper of a broad tank
   5.3. Removal and radiator installation on models without the conditioner
   5.4. Removal and radiator installation on models with the conditioner
   5.5. Removal and installation of the water pump on models with petrol engines
   5.6. Removal and installation of the water pump on models with diesel engines
   5.7. Removal and installation of the fan of a radiator
   5.8. Replacement of the gauge of inclusion of the fan
   5.9. Removal and thermostat installation
   5.10. Thermostat check
   5.11. Replacement of hoses of system of cooling of the engine
   5.12. Check of level of a cooling liquid
   5.13. Replacement of a cooling liquid
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes



5.9. Removal and thermostat installation
THE GENERAL DATA

Thermostat installation

And – the petrol engine;
– the diesel engine;
1 – a spring collar;
2 – a bolt of fastening of a cover;
3 – a cover of the case of the thermostat;
4 – a sealing ring;
5 – the thermostat;
6 – the union of a hose of a broad tank;
7 – a branch pipe of giving of a liquid in a heater;
8 – a branch pipe of a hose plum of a liquid from a broad tank;
9 – скоба;
10 – a branch pipe of a hose plum of a liquid from a heater;
11 – the case of the water pump;
12 – a sealing ring;
13 – a tube for a cooling liquid;
14 – the thermostat case;
15 – a bolt of fastening of the case of the thermostat;
16 – a stopper;
17 – the gauge of temperature of a cooling liquid

At infringement of a temperature mode of the engine remove, check up and if necessary replace the thermostat.

PERFORMANCE ORDER
1. Remove an engine casing (subsection 2.1 see).
2. Merge cooling liquid (subsection 5.13 see).
3. Loosen the an inhaling of a collar 1 also disconnect a hose from a cover of 3 cases of the thermostat.
4. Turn away two bolts of 2 fastenings and uncover 3 cases of the thermostat the engine.
5. Having turned the thermostat 5 on 90 counter-clockwise, take out it from the case.
6. Establish the thermostat 5 in the case and fix it in it, having turned on 90 clockwise.
7. Replace the sealing ring torn or lost elasticity 4. It is recommended to replace a ring new irrespective of its condition.
8. Before installation of the new thermostat check up its serviceability, and also absence on a saddle of its valve of extraneous particles which can interfere with full closing of the valve.
9. Establish a sealing ring 4 on a cover 3 thermostats, preliminary having cleared and having greased a ring with a pure cooling liquid.
10. Establish a cover 3 thermostats on the engine and wrap bolts of 2 its fastenings.
11. Connect to the case of the thermostat a hose and fix its collar.
12. Fill in a liquid in cooling system (subsection 5.13 see).