Skoda Fabia

Since 2000 of release

Repair and car operation

Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
+ 4. The power supply system
+ 5. Cooling system
- 6. System of release of the fulfilled gases
   6.1. Check of tightness of system of release of the fulfilled gases
   6.2. Removal and installation of a reception pipe of the muffler (petrol engines)
   6.3. Removal and installation of a reception pipe of the muffler (diesel engines)
   6.4. Replacement of knots of the muffler in gathering (the resonator or the muffler)
   6.5. System recycling the fulfilled gases (engines of 1,4 l, 55 and 74 kw)
   6.6. System recycling the fulfilled gases (engines of 1,9 l, 74 kw)
   6.7. System recycling the fulfilled gases (engines of 1,9 l, 47 kw)
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes

6.4. Replacement of knots of the muffler in gathering (the resonator or the muffler)

THE GENERAL DATA

Labels on a pipe of the muffler

1 – a pipe of the muffler;

2 – the resonator;

3 – the connecting plug;

And, In, With – labels on a pipe

The muffler in gathering represents not folding knot, but if necessary it is possible to replace separately the muffler or the resonator.

PERFORMANCE ORDER

1. Cut a pipe of the muffler at right angle on an average label And.

2. Remove the replaced knot (the resonator or the muffler).

3. Accurately clear of agnails end faces of pipes.

4. Establish on the car new knot with the connecting plug 3. For convenience of work it is recommended to have coupling bolts of collars of fastening of the connecting plug heads downwards.

5. Expose end faces of the connecting plug on extreme labels In and With on pipes from both parties.

6. Check up and if necessary level release system (subsection 6.2 see).

7. Expose the muffler in horizontal position and in regular intervals tighten coupling bolts of collars of fastening of the connecting plug.

The inhaling moments, Нм

Cтяжные bolts of collars of fastening of the connecting plug (on models with the engine in volume 1,0 and 1,4)
25

The same (on models with the engine in volume 1,9)
40