Skoda Fabia

Since 2000 of release

Repair and car operation

6.6. System recycling the fulfilled gases (engines of 1,9 l, 74 kw)

THE GENERAL DATA

System details recycling the diesel engine of 1,9 l, 74 kw

1 – an inlet pipe; 2 – a sealing ring; 3 – the case throttle заслонки; 4 – the system valve recycling; 5 – a bolt of fastening of the case throttle заслонки;

6 – a branch pipe of the case throttle заслонки; 7 – a lining; 8 – a bolt of fastening of a connecting pipe; 9 – a final collector; 10 – a nut of fastening of a connecting pipe; 11 – a connecting pipe

Valve check recycling the diesel engine of 1,9 l, 74 kw

1 – the valve recycling; 2 – the case throttle заслонки; 3 – throttle заслонка; 4 – a valve rod; 5 – the vacuum pump

Valve check

PERFORMANCE ORDER

1. Remove an engine casing (subsection 2.1 see). 2. Disconnect a vacuum hose from the union of the valve 4 (fig. of the Detail of system recycling the diesel engine of 1,9 l, 74 kw see) recycling systems. 3. Loosen the an inhaling of a collar also disconnect an air line from the case 3 throttle заслонки. 4. Connect to the union of the valve 1 (fig. valve Check recycling the diesel engine of 1,9 l, 74 kw see) the vacuum pump 5. 5. By means of the pump create depression in the valve. The rod 4 valves should move upwards, and after a detachment of the vacuum pump to return to a starting position. Otherwise the valve is faulty also it it is necessary to replace.

Removal and installation of elements of system recycling

The valve recycling the fulfilled gases, established on the case throttle заслонки, represents with it not folding design. It is possible to replace the valve only together with the case throttle заслонки.

PERFORMANCE ORDER

1. Remove the top casing of the engine (subsection 2.1 see). 2. Disconnect a vacuum hose from the union of the valve 4 (fig. of the Detail of system recycling the diesel engine of 1,9 l, 74 kw see) systems recycling. 3. Loosen the an inhaling of a collar also disconnect an air line from the case 3 throttle заслонки. 4. Turn away two bolts of 8 fastenings of a connecting pipe 11 to the case 3 throttle заслонки. 5. Turn away three bolts of 5 fastenings and remove the case 3 throttle заслонки with the valve 4. 6. For removal of a connecting pipe 11 turn on two nuts of 10 its fastenings to a final collector. 7. Replace linings 7 and a sealing ring 2 irrespective of their condition. 8. Establish system elements recycling the fulfilled gases upside-down. Nuts of 10 fastenings of a connecting pipe to a final collector replace new. Grease hairpins of a final collector with graphite greasing.

The inhaling moments, Нм

Bolts of fastening of the valve	10
Bolts of fastening of a connecting pipe to the valve	25
Nuts of fastening of a connecting pipe to a final collector	25