Skoda Fabia
Since 2000 of release
Repair and car operation
Shkoda
Fabija
+
1.1. The car description
+
2. The engine
+
3. Greasing system
+
4. The power supply system
+
5. Cooling system
+
6. System of release of the fulfilled gases
-
7. Transmission and a running gear
-
7.1. A transmission
7.1.1. Technical characteristics of transmissions
(КП)
-
7.1.2. Type 002 transmission
7.1.2.1. Removal and installation
7.1.2.2. Check of level and oil pouring in a transmission
7.1.2.3. Refuelling of a new box
7.1.2.4. Replacement of a cover of the lever of a gear change
7.1.2.5. Removal and installation of a drive of a gear change
7.1.2.6. Dismantling and assemblage of the mechanism of a gear change
7.1.2.7. Check of correctness of adjustment of a drive of a gear change
7.1.2.8. Adjustment of a drive of a gear change
+
7.1.3. A type transmission 02T
+
7.2. A forward suspension bracket
+
7.3. A back suspension bracket
+
8. A steering
+
9. Brake system
+
10. An electric equipment
+
11. A body
+
12. Electroschemes
7.1.2.4. Replacement of a cover of the lever of a gear change
THE GENERAL DATA
Details of fastening of a cover of the lever of a gear change
1 – the handle;
2 – a cover;
3 – a clamp;
4 – a collar;
5 – facing of the floor console
Extraction of a cover of the lever of a gear change from a framework
Removal of a cover from the handle
1 – a cover;
2 – a clamp;
3 – the handle;
4 – a cover framework
PERFORMANCE ORDER
1.
Accurately having hooked a screw-driver in the places specified by arrows on (fig.
Extraction of a cover of the lever of a gear change from a framework
see
), deduce from gearing a framework 4 (fig.
Removal of a cover from the handle
see
) cover from gearing with facing 5 (fig.
of the Detail of fastening of a cover of the lever of a gear change
see
) floor console.
2.
Turn out a cover 2 inside out.
3.
Unclench a collar of 4 fastenings of the handle to the gear change lever.
4.
Remove the handle 1 with a cover 2 from the lever.
5.
Having unclenched by means of a screw-driver a clamp 2 (fig.
Removal of a cover from the handle
see
), remove it from the handle 3.
6.
Turn the handle 3 and remove from it a cover 1.
7.
Establish a cover upside-down, reliably having fixed it on the handle by means of a clamp.
