Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
- 4. The power supply system
   4.1. Removal and installation of the air filter
   4.2. Replacement of a filtering element of the air filter
   4.3. Replacement of the gauge of the index of level of fuel
   4.4. Removal and installation of a fuel tank
   4.5. Check of the air valve
   4.6. Check of the gravitational valve
   4.7. Replacement of the fuel filter
   4.8. Check of the valve of heating of fuel
   4.9. Replacement of an adsorber of system of catching of steams of fuel
   4.10. Replacement of a fuel radiator
   4.11. Removal and installation of the vacuum pump of the diesel engine
   4.12. Removal and installation of an inlet pipe of the engine
   4.13. Removal and installation of a pedal of an accelerator
   + 4.14. Removal and installation of atomizers
   4.15. Check of a feed circuit of atomizers of the petrol engine
   4.16. Check of resistance of a pump-atomizer
   4.17. Check of candles накаливания the diesel engine of 1,9 l, 47 kw
   4.18. Check of a feed circuit of candles накаливания
   4.19. Check of the gauge of temperature of a cooling liquid
   4.20. Check of the gauge of temperature of air arriving in the engine
   4.21. Check of the gauge of temperature of fuel of the diesel engine of 1,9 l, 74 kw
   4.22. Check of the gauge of frequency of rotation of a cranked shaft
   4.23. Check of a drive throttle заслонки
   4.24. Check of the gauge of position of a camshaft
   4.25. Check элекромагнитного the valve recycling the fulfilled gases
   4.26. Check of the relay of the fuel pump of engines of 1,4 l, 55 and 74 kw
   4.27. Check of the electromagnetic valve of a purge of an adsorber
   4.28. Removal and installation турбокомпрессора
   4.29. Removal and installation of an intermediate cooler of air
   4.30. Check of the valve of pressure of pressurisation
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes


75d7f213

4.29. Removal and installation of an intermediate cooler of air
THE GENERAL DATA

Intermediate cooler of air
1 – a cooler casing;
2 – an intermediate cooler of air;
3 – a bolt of fastening of a cooler;
4 – a sealing ring;
5 – the gauge of pressure and air temperature;
6 – an arm;
7 – a bolt of fastening of the gauge;
8 – a connecting hose;
9 – the top air line;
10 – a bolt of fastening of a back air line;
11 – a branch pipe of a hose of ventilation картера;
12 – a back air line;
13 – турбокомпрессор;
14 – the bottom air line;
15 – an arm;
16 – a bolt of fastening of the bottom air line

PERFORMANCE ORDER
1. Remove the right headlight (subsection 10.8 see).
2. Disconnect from the gauge 2 колодку 1 with wires. Disconnect from a branch pipe a hose 3.
3. Remove the forward buffer.
4. Remove локарь the right forward wheel.
5. Remove a cooler casing.
6. Disconnect a hose 1 from an intermediate cooler 3. Turn away bolts of 2 fastenings and remove an intermediate cooler.
7. Establish an intermediate cooler upside-down.