Skoda Fabia

Since 2000 of release

Repair and car operation



Shkoda Fabija
+ 1.1. The car description
+ 2. The engine
+ 3. Greasing system
- 4. The power supply system
   4.1. Removal and installation of the air filter
   4.2. Replacement of a filtering element of the air filter
   4.3. Replacement of the gauge of the index of level of fuel
   4.4. Removal and installation of a fuel tank
   4.5. Check of the air valve
   4.6. Check of the gravitational valve
   4.7. Replacement of the fuel filter
   4.8. Check of the valve of heating of fuel
   4.9. Replacement of an adsorber of system of catching of steams of fuel
   4.10. Replacement of a fuel radiator
   4.11. Removal and installation of the vacuum pump of the diesel engine
   4.12. Removal and installation of an inlet pipe of the engine
   4.13. Removal and installation of a pedal of an accelerator
   + 4.14. Removal and installation of atomizers
   4.15. Check of a feed circuit of atomizers of the petrol engine
   4.16. Check of resistance of a pump-atomizer
   4.17. Check of candles накаливания the diesel engine of 1,9 l, 47 kw
   4.18. Check of a feed circuit of candles накаливания
   4.19. Check of the gauge of temperature of a cooling liquid
   4.20. Check of the gauge of temperature of air arriving in the engine
   4.21. Check of the gauge of temperature of fuel of the diesel engine of 1,9 l, 74 kw
   4.22. Check of the gauge of frequency of rotation of a cranked shaft
   4.23. Check of a drive throttle заслонки
   4.24. Check of the gauge of position of a camshaft
   4.25. Check элекромагнитного the valve recycling the fulfilled gases
   4.26. Check of the relay of the fuel pump of engines of 1,4 l, 55 and 74 kw
   4.27. Check of the electromagnetic valve of a purge of an adsorber
   4.28. Removal and installation турбокомпрессора
   4.29. Removal and installation of an intermediate cooler of air
   4.30. Check of the valve of pressure of pressurisation
+ 5. Cooling system
+ 6. System of release of the fulfilled gases
+ 7. Transmission and a running gear
+ 8. A steering
+ 9. Brake system
+ 10. An electric equipment
+ 11. A body
+ 12. Electroschemes


75d7f213

4.3. Replacement of the gauge of the index of level of fuel
THE GENERAL DATA

Kind from salon on the gauge of level of fuel with топливоприемником


1 – a hatch cover;

2 – a sealant of wires;

3 – connecting колодка;

4 – a hose of the return fuel plum;

5 – топливопровод fuel givings;

6 – labels on a fuel tank and a flange топливоприемника

Details of the power supply system of the carburettor engine

1 – a fuel tank;
2 – a bolt of fastening of a tank;
3 – a bolt of fastening of a collar;
4 – a collar of a fuel tank;
5 – a tube of a purge of an adsorber;
6 – топливопровод fuel givings;
7 – the fuel filter;
8 – the screw of fastening of the fuel filter;
9 – the gauge of the index of level of fuel;
10 – the fuel pump;
11 – топливопровод the return fuel plum;
12 – a tube of giving of fuel in the fuel filter;
13 – a sealing ring;
14 – a nut;
15 – the air valve;
16 – a stopper of a bulk mouth;
17 – a bolt;
18 – a bulk mouth;
19 – the gravitational valve;
20 – a tube of a purge of an adsorber;
21 – an adsorber of system of catching of steams of fuel;
22 – a bolt of fastening of an adsorber;
23 – a tube of ventilation of a tank

PERFORMANCE ORDER
1. Disconnect a wire from the plug - the storage battery.
2. Remove a pillow of a back seat (subsection 11.4.3 see).
3. Uncover 1 (fig. the Kind from salon on the gauge of level of fuel with топливоприемником see) hatch in a floor over a fuel tank.
4. Disconnect колодку 3 with wires from the gauge of level of fuel.
5. Having pressed buttons of clamps, disconnect hoses 4 and 5 from unions on a flange топливоприемника.
6. A special key 1 turn away a nut 2 and take out from a fuel tank топливоприемник in gathering with the gauge of the index of level of fuel. Take out a sealing ring of a flange.
7. Disconnect wires 3 from the gauge 2 indexes of level of fuel (1 – a latch). Mark wires not to mix at installation.
8. Having picked up a screw-driver of a latch 1, shift the gauge 2 downwards and remove it with топливоприемника.
9. Insert the new gauge in топливоприемник and press it from below that latches 1 have fixed it. Connect to the wire gauge.
10. Grease with fuel a sealing ring of a flange and establish топливоприемник with the gauge in a fuel tank in an order, the return to removal.
11. Turn топливоприемник so that arrows on a flange топливоприемника and a fuel tank have coincided, as is shown in drawing.
12. Connect топливопровод 1 givings of fuel (black colour) to the union designated by the letter V, and a hose 2 return fuel plum (dark blue colour) to union R.
13. Similarly replace the gauge on cars with the petrol engines, fixed on the fuel pump 10 (fig. of the Detail of the power supply system of the carburettor engine see) which acts in film and established the same as топливоприемник the diesel engine. At pump installation grease with fuel a sealing ring 13.